OJ Same Day appliance repairs Expert with 25 years of experience

Working Hours
7 days 8 AM - 9 PM

Dryer Not Heating? Just Follow These 5 Easy Troubleshooting Tips


Are you frustrated with your wet clothes even after putting them in the dryer? One of the primary reasons for the wet clothes not drying is the dryer not heating. There are several reasons that can lead to the appliance being unable to get heated. In that case, assessing the reasons for the problem will help find the right solution. However, it is vital to note when the appliance fails to work and fix the issue.

Easy Troubleshooting Tips to Fix Dryer Not Heating

There are multiple causes that can explain the problem of the new dryer not heating. At that moment, before calling a dryer repair service just follow our easy guide. Here are some easy and hassle-free troubleshooting tips –

1.       Check Gas or Electric Supply

Do you have an electric dryer? In that case, you need to check out the condition of the circuit breaker. The electric dryer needs two 120-volt breakers. You need to locate the electrical panel and reset circuit breakers if tripped. If the fuse is blown, replacement is essential. Another cause of a new dryer not heating is the absence of gas. Make sure to check that the gas valve is on. You also need to check if the gas pipe connected to the appliance is in good condition.

2.       Assess the Exhaust Vent Located Outside

One of the most common reasons for a dryer not heating is the clogging of the dryer vent. That is why you need to check out if the vent of the dryer is blocked. You need to time the machine on an enhanced heat setting. Now, go out and look out for the exhaust vent. Put your hand in front of the vent and check if the air coming out is warm at a regular flow. If there is obscuration to the airflow or the air is not warm enough, you need to get the vent cleaned. In some cases, replacement might also be necessary.

3.       Remove Excess Lint

Another reason why the dryer is not functioning is the clogging of the lint screen. In that case, you need to take out as much lint as you can from the screen. Moreover, you can also place the lint screen within hot water and scrub it with dish soap. For this, you can take the assistance of a soft toothbrush. After that, you need to dry the lint screen. In order to accomplish this, you can choose an excellent vacuum attachment.

4.       Replace the Damaged Heating Element

Did you know that a broken or damaged heating element can lead to a new dryer not heating? Sometimes, lint clogging or natural degradation can cause massive damage to the coils to present within the heating element. To determine if the heating element can be used further, opt for the multimeter test. If the heating element doesn’t pass the test, you will need to replace it. For that, take out the damaged heating element and replace it with the new one. However, if you do not have enough expertise, it is advisable to get in touch with a professional.

5.    Concentrate on the Load Types

Now, this may sound too bizarre, but uneven loads can also lead to a heating issue with the dryer. It is imperative that you put similar items in the machine for optimum performance. Mixing the item types can confuse the dryer, leading to the drying of the smaller clothes. But, the larger ones will remain damp. The only solution is to maintain the load types.

It is, without a doubt, that a dryer is one of the most essential appliances you need in your daily life. That is why the dryer not heating is a massive issue that needs to be resolved immediately. However, for that, you need to identify the cause of the problem and apply the right solution. But, if the issue isn’t yet fixed, it is crucial to get in touch with a technician.